24/7 Night Vision FPV Camera (B/W)
0.001 lux monochrome imaging, 1920 × 1080 at 50 fps, 19 × 19 mm analog CVBS FPV camera module for UAV integration.
System Detail
What It Is
The XHF-A6M19B is an Ultra Low Light Analog FPV Camera Module employing a 1/1.8-inch Ultra Starlight CMOS sensor that delivers monochrome analog video output for board-level integration into FPV drones, tactical UAVs, and embedded low-light vision systems.
Performance
The XHF-A6M19B achieves a minimum illumination of 0.001 lux without active infrared illumination, enabling imaging in starlight conditions. It captures 1920 × 1080 resolution at 50 fps with 1500 TVL horizontal resolution, transmitted as a CVBS PAL analog signal through an F1.1 aperture lens with a 65.5° field of view, drawing 1.1 W from a 10–28 V DC supply.
Key Technical Features
- Integrated AI ISP with deep noise reduction algorithm performs real-time contrast and detail recovery in extreme low-light scenes without requiring any external illumination source
- CVBS analog output in PAL format at 1500 TVL horizontal resolution eliminates digital encoding latency, supporting the real-time control loops required by FPV piloting
- 19 × 19 mm board-level form factor with 10–28 V DC input accommodates standard LiPo UAV power configurations without additional power regulation hardware
- Automatic exposure and gain control maintains stable monochrome image output across varying illumination conditions, including mixed urban lighting environments
Platform Compatibility
The XHF-A6M19B is designed for direct integration into FPV drone airframes, tactical UAV payloads, robotics platforms, and compact embedded vision enclosures; it requires an external analog video transmitter, DVR, or OSD module for signal relay, recording, and display.
Ultra-Low-Light Monochrome Performance
The XHF-A6M19B captures clear monochrome imagery at illumination levels as low as 0.001 lux without any active infrared illumination. This enables reliable FPV navigation in starlight conditions where conventional cameras produce unusable noise.
AI Deep Noise Reduction
An integrated AI ISP applies deep noise reduction in real time, processing each frame to recover detail from extremely dark scenes. The result is a stable, high-contrast monochrome image that retains fine texture even in near-zero ambient light.
Analog CVBS Low-Latency Output
The camera outputs a standard CVBS analog signal in PAL format, delivering 1500 TVL horizontal resolution at 50 fps. Analog transmission eliminates encoding latency, making the output suited to real-time FPV control loops where frame delay is critical.
Ultra-Compact Module Form Factor
The 19 × 19 mm board-level form factor and 12 g weight are matched to the structural constraints of lightweight FPV drone airframes. The 10–28 V DC input range accommodates common LiPo battery configurations used across a broad range of UAV platforms.
Our technical team provides pre-sales support for system integration planning, field testing, and deployment assessment.
Contact Technical TeamFull Technical Specifications
| Parameter | Specification |
|---|---|
| GENERAL | |
| Model Number | XHF-A6M19B |
| Product Series | XHF-A6M19 Series |
| Product Type | Night Vision Analog FPV Camera |
| OPTICAL | |
| Sensor Type | CMOS (EO/Ultra Low Light) |
| Sensor Size | 1/1.8" |
| Resolution | 1920 × 1080 |
| Color Mode | Monochrome (B/W) |
| Focal Length | 6 mm |
| Aperture (F-number) | F1.1 |
| FOV Diagonal | 65.5° |
| PERFORMANCE | |
| Min. Illumination | 0.001 lux |
| Frame Rate | 50 fps |
| MECHANICAL | |
| Dimensions | 19 × 19 mm |
| Weight | 12 g |
| ELECTRICAL | |
| Operating Voltage | 10–28 V DC |
| Power Consumption | 1.1 W |
| ENVIRONMENTAL | |
| Operating Temperature | −20 °C to +60 °C |
| FEATURES | |
| Wide Dynamic Range | Wide Dynamic Range (WDR) |
| Noise Reduction | AI Deep Noise Reduction |
| INTERFACE | |
| Output Format | CVBS |
| Video Output | PAL, 1500 TVL |
Designed for the Field
FPV Drone Night Navigation
The XHF-A6M19B provides passive monochrome imaging for FPV drone pilots operating in low-ambient-light environments where standard cameras produce unusable video.
Tactical UAV ISR Payload
Tactical UAV platforms benefit from the passive nighttime imaging capability, eliminating the active infrared signature that would otherwise compromise covert operations.
OEM Embedded Vision Module
OEM integrators embedding a compact low-light camera into custom UAV, robotics, or surveillance enclosures use the 19 × 19 mm board form factor for minimal-redesign installation.
FPV Drone Night Navigation
The XHF-A6M19B is the primary imaging sensor for FPV drones operating in ambient light levels below the threshold of conventional cameras. It enables real-time monochrome video transmission for pilot navigation through dense terrain, urban structures, and unlit environments at night. Minimum illumination of 0.001 lux without active infrared illumination ensures passive nighttime imaging with no active signature. The F1.1 aperture and 50 fps frame rate sustain a sharp, low-latency video stream at the flight speeds typical of FPV drone operations.
- Min Illumination: 0.001 Lux (no IR required)
- Frame Rate: 50 fps
- Aperture: F1.1
- Resolution: 1920 × 1080
Tactical UAV ISR Payload
Tactical UAV platforms require silent, passive nighttime imaging without the electromagnetic or visible signature produced by active illumination systems. The XHF-A6M19B delivers reliable monochrome imagery over analog CVBS links compatible with standard ground station analog receivers. The 1500 TVL horizontal resolution provides detail-rich imagery for operator situational awareness, and the 10–28 V DC input range accommodates the power buses found across military and commercial UAV platforms.
- Video Output: CVBS, PAL
- Horizontal Resolution: 1500 TVL
- Supply Voltage: 10–28 V DC
- Weight: 12 g
OEM Embedded Vision Module
The 19 × 19 mm board form factor is engineered for OEM integrators embedding a compact low-light camera into custom UAV, robotics, or surveillance enclosures with minimal mechanical redesign. No active illumination hardware is required, simplifying the system bill of materials. Power consumption of 1.1 W and a weight of 12 g allow the module to fit within the tight budgets of sub-250 g UAV systems and other size-, weight-, and power-constrained embedded platforms.
- Dimensions: 19 × 19 mm
- Power Consumption: 1.1 W
- Weight: 12 g
- Supply Voltage: 10–28 V DC
System Integration
Interface Architecture
The XHF-A6M19B provides a single CVBS analog video output carrying PAL-format monochrome video at 1500 TVL horizontal resolution, powered by a 10–28 V DC supply on the same cable harness.
OEM-level configuration support and full integration documentation require a corporate account — contact sales@star-navi.net for access.
CVBS Analog Output
The camera outputs a standard CVBS analog signal carrying PAL-format monochrome video at 1500 TVL horizontal resolution and 50 fps. The signal is compatible with all standard analog FPV video transmitters, analog DVR receivers, and OSD modules that accept a PAL composite video input.
Request a Quote or Demo Unit
Our technical sales team can arrange a field demonstration, provide deployment planning, and prepare a formal quotation for your procurement requirements.
Contact Sales TeamSign In to Your Account
Access restricted integration resources and downloadable documentation for verified corporate customers.
Don't have an account? Apply for corporate access →
Apply for Corporate Access
Complete the form below. Your application will be reviewed within 1–2 business days. A corporate email address is required — free webmail addresses are not accepted.
Already have an account? Sign in here →